Philips ADD6901 Bedienungsanleitung Seite 8

5. Before �rst use
• Remove all packaging.
• Always keep the water dispenser away from any source of heat or direct
sunlight.
• Remove the tank cover and the water tank. Wash with mild detergent and
dry thoroughly.
• Fill the tap water tank with tap water and place it back to the appliance.
Place the lid back to the water tank properly.
• Connect the appliance with power.
WARNING: DO NOT DISASSEMBLE THIS APPLIANCE YOURSELF. ELECTRIC
ELEMENTS WILL BE EXPOSED AND THERE IS A RISK OF ELECTRIC SHOCK.
• Check if there is any water leakage. If there is any strange noise, burnt
smell, or smoke, please disconnect power and contact customer services.
• In order to ensure the best �ltration performance, discard all the �ltered
water. Press and hold XX and XX for 3 seconds to empty the tank and pipes
when �ltration indicator turns off. Repeat this until two tanks of tap water
are �ltered.
• For �rst time use, in order to avoid dry-heating, please extract some
ambient water before extracting hot water.
First time use
• During �rst time use, please check if any water leaks from or gathers
around the dispenser, if there is any strange noise, burnt smell or smoke
coming out from the product, please disconnect the power cord and
contact customer services.
• For �rst time use, in order to ensure the best �ltration performance, �ll the
tap water tank and discard all the �ltered water. You may press and hold
" + " for 3 seconds to empty the tank and pipes when �ltration is
completed. Repeat this until two tanks of tap water are �ltered.
• For �rst time use, in order to avoid dry-heating and protect the machine,
please extract some ambient water before extracting hot water.
08
3s 3s