Werbung
1
2
6
3
5
4
G Operating instruction
Controls and Displays
• 1. Display
• 2. Mode button
• 3. Alarm button
• 4. Set button
• 5.
button ( )
Up
▲
• 6.
Down
button ( )
▼
1. Explanation of Warning Symbols and
Notes
Warning
This symbol is used to indicate safety
instructions or to draw your attention to
specific hazards and risks.
Note
This symbol is used to indicate additional
information or important notes.
2. Package Contents
• LCD thermometer with pen holder
• 1x CR2025 button cell battery
• These operating instructions
3. Safety Notes
• The product is intended for private, non-
commercial use only.
• Protect the product from dirt, moisture and
overheating and use it in dry rooms only.
• Do not drop the product and do not expose it
to any major shocks.
• Do not open the device or continue to operate
it if it becomes damaged.
• As with all electrical devices, this device
should be kept out of the reach of children.
• Dispose of packaging material immediately
according to locally applicable regulations.
• Do not modify the device in any way. Doing so
Remove!
voids the warranty.
2
5. Installation and Settings
Warning
• Always observe the correct polarity (+ and
- markings) when installing batteries. The
polarity is marked on all batteries.
• Do not mix old and new batteries or
batteries of a different type or make.
• Do not short-circuit batteries.
• Do not charge batteries.
• Do not throw batteries in a fire.
• Do not allow children to change batteries
without supervision.
• Remove the batteries from products that
are not being used for an extended period
(unless these are being kept ready for an
5.1. Setting 12 h/24 h Format, the Time,
emergency).
and the Date
4. Functions
• In normal time mode, press the
Normal time mode
• Use the
Displays the time, date, weekday and
temperature.
• Then press the
Alarm and snooze function
Set a daily alarm and snooze function, select an
alarm sound.
Birthday reminder
Alarm function for a specific day in a specific year
• Next press the
and at a specific time. The alarm plays a popular
birthday song at the specified time. This alarm
melody cannot be changed.
• Next press the
Timer
Classic count-down alarm (egg timer) with a time
range from 23:59 to 00:01. After the specified
• Next press the
time has elapsed, an alarm tone goes off.
Temperature function
• Next press the
Automatically measures and displays the ambient
temperature.
Music function
• After making the settings, press the MODE
In normal time mode, press the
button to play
▼
music or to stop it.
Note
• In the course of setting the date, the day
Note
of the wee k – Monday (MON) to Sunday
• After removal of the batte ries' contact
(SUN) – is set automatically.
bre aker, the normal time is displayed in
• If no button is pressed for one minute
12-hour format and a me lody signals that
while the settings are being made, the
the product is ready for use.
de vice automatically switche s back to
• The function modes are organize d as
normal time mode. T he se ttings that we re
follows: Normal time mode → 12 h/24 h
made up to that point are not saved!
format /time/date → Alarm and snooze
Birthday reminder
5.2 Alarm and Snooze Function
function →
Timer
Normal time mode
→
→
• In normal mode, press the
• When the item flashe s, it means that the
times or press the
ite m selected can be set.
switch to alarm mode.
• In alarm mode, press the
use the
▲
MODE
button
for the alarm.
once to switch between 12 h and 24 h format.
• Next press the
and
buttons to select the format
using the
▲
▼
▲
you want to use.
• Then press the
SET
button to set the time
melody from the melodies 1 through 9 using
using the
and
buttons. The time is set
the
and
▲
▼
▲
beginning with the hour in the format that was
• After making all the settings, press the
previously selected, 12 or 24 hour time.
MODE button three times to return to normal
The hour flashes in the display.
time mode.
button to set the minutes
SET
Note – Alarm function
using the
and
buttons.
▲
▼
• The alarm goe s off every day at the
The minutes flash in the display.
se t time .
SET
button to set the current
• The active alarm function is indicated by
year using the
and
buttons.
▲
▼
the word 'Alarm' in the display.
The year flashes in the display.
• To complete ly de activate the alarm
SET
button to set the current
function, press the ALARM button in
month using the
and
buttons.
▲
▼
normal time mode to switch to alarm
The month ( ) flashes in the display.
M
mode. Pre ss the SET button five times
SET
button to set the current
until you only see three dashe s in the
day using the
and
buttons.
▲
▼
display (-:--).
The day ( ) flashes in the display.
D
button four times to return to normal time
mode.
button two
MODE
ALARM
button directly to
button and
SET
and
buttons to set the hour
▼
button to set the minutes
SET
and
buttons.
▼
SET
button to select an alarm
buttons.
▼
3
Werbung
