Werbung
Montage-, Bedienungs- und Wartungsanleitung
CVAB / CVAT Lüftungsbox, schallgedämmt
10. Konformitätserklärung
EC Declaration of Conformity
The manufacturer
hereby declares that the product described below
Tipo
Serial number
CE mark date
complies with the requirements of the Machinery Directive 2006/42/EC and the Low Voltage Directive 2006/95/EC based
on the following harmonized standards
It also complies with the Commission Regulation (EU) No 327/2011 implementing Directive 2009/125/EC with regard to
ecodesign requirements for fans driven by motors with an electric input power between 125 W and 500 kW (including
those fans for replacement of identical fans integrated in products which were placed on the market before 1 January
2013)
Compliance with EN ISO 13857 refers to safety devices when supplied, and installed, with the product. The responsibility
for compliance with EN ISO 13857 is the installer of the system where the product is applied.
The machinery described above only lacks the necessary protective means or safety components for avoiding the following
hazards: the contact with a rotating shaft or impeller, object being drawn into the fan inlet and ejected at fan discharge
even when the fan is switched off, and access through an unauthorized opening of connecting ductworks.
The Technical Director is the person authorized to compile relevant technical documentation in accordance with Annex VII
part A.
Additional Information:
The product design is inherently benign, and fulfills the requirements of the EMC Directive 2004/108/EC with regard to
emission and immunity to electromagnetic levels.
Signed by
www.solerpalau.de
S&P Sistemas de Ventilación S.L.U
C/Llevant , 4
08150-Parets del Vallès-Barcelona
CENTRIFUGAL CABINET FANS
CVAB / CVAT
All Manufactured
05
EN 60034-1:2010 // EN 60204-1:2006 // EN ISO 12100:2010 //
EN ISO 13857:2008 //
Carlos Campderrós
S&P Sistemas de Ventilación S.L.U
Julio 2015
1/1
CVAB / CVAT
Seite 7
Werbung
