Herunterladen Diese Seite drucken

Silvercrest HG10262C Bedienungsanleitung Seite 13

Dampfbürste

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Do not operate the product
 
with wet hands or while
standing on a wet floor. Do not
touch the power plug with wet
hands.
Protect the product against
 
heat. Do not place the product
close to open flames or heat
sources such as stoves or
heating appliances.
Protect the power cord against
 
damages. Do not let it hang
over sharp edges, do not
squeeze or bend it. Keep the
power cord away from hot
surfaces and open flames and
ensure that nobody can pull on
or trip over it unintentionally.
Stop using the product if the
 
anti-kink protection on the
power cord is damaged!
Do not pull the power plug
 
out of the power outlet by
the power cord. Do not wrap
the power cord around the
product.
Protect the product, its power
 
cord and power plug against
dust, direct sunlight, dripping
and splashing water.
Store the product in a cool,
 
dry place, protected from
moisture and out of the reach
of children.
10 GB/IE/NI
Clean the product (see
 
"Cleaning and care").
Burn hazards
Care should be taken when
 
using the product due to the
emission of steam.
Touch the heated up product
 
by its handle only.
Steam is very hot. Never put
 
your hands in front of the
steam nozzles.
Never touch the steam
 
nozzles in operation or while
heated up (e.g. to test the
temperature).
Keep the product and its cord
 
out of reach of children less
than 8 years of age when it is
energized or cooling down.
˜ Before first use
Remove the packaging. Check if all parts are
 
complete.
Clean the product (see "Cleaning and
 
care").
NOTE: The product may give off some
vapours or odours during first use. These
are production or transport residue that will
quickly subside. There may also be quiet
noises such as clicking or crackling. These
will also quickly subside once the plastic
parts have finally adjusted to the operating
conditions.
˜ Operation
˜ Off mode
The product enters off mode when on/off
 
in O position.
switch
12 ]
[

Werbung

loading

Diese Anleitung auch für:

Hg10262d460396 2401Sdmf 1300 b2