Electrical Safety Rules; Equipment Safety Rules; Application; Personnel Protection Safety Rules - Autool Pt660 Bedienungsanleitung

Electrical
safety rules
Equipment
safety rules

Application

Personnel
protection
safety rules
If the device has not been used for a long time or the
battery is completely depleted, it may not turn on proper-
ly. This is normal. Please replace the battery before
attempting to power on the device.
Never leave the device unattended while it is powered
on. Always turn off the device at the main switch when it
is not in use for its intended purpose!
Do not attempt to repair the equipment yourself.
Before connecting the device to power, check if the
voltage of the power supply battery matches the rated
parameters. Mismatched voltage may pose serious
hazards and damage the device.
It is essential to protect the equipment from rainwater,
moisture, mechanical damage, overload, and rough
handling.
Before use, check if the battery, connecting hoses, and
adapters are damaged. Do not operate the device if any
damage is found.
Use the equipment only in compliance with all safety
instructions, technical documents, and vehicle manufac-
turer specifications.
If replacing the power battery, use only a brand-new and
unopened product of the correct type.
The oil in the corresponding system encountered during
measurement may be harmful to health; any contact
must be avoided.
Always wear safety goggles when using the equipment
to prevent possible splashing into the eyes. If contact
occurs, rinse with flowing water for several minutes with
eyelids open. If symptoms persist, please consult a
doctor.
4