Werbung
Verfügbare Sprachen
Verfügbare Sprachen
12
Screw the M3 ball stud into the outer bore of
the rudder horn.
Place the ball head of the elevator linkage on
the ball stud.
The seats are fixed with narrow strips of Velcro in the cabin frame.
The rear dashboard is glued with epoxy firmly in the cabin frame.
Optional pilot, harness, etc. can be installed, but you should generally pay attention to the weight of
the electric model.
ASSEMBLY THE ELEVATOR
Thread the linkage into the rear of the fuse-
lage and secure the elevator to the fuselage
with the M4 countersunk screws.
14
Now the linkage can also be hooked into the
ball head of the servo and a mechanical length
adjustment can be made.
ASSEMBLY THE COCKPIT
ENGLISH
13
15
Werbung
