Congratulation that you took the choice to purchase this Robbe RC model airplane, a very good
choice from our point of view.
We put a lot of attention to the overall quality of the airplane in terms of design, performance and
manufacturing quality. We used all of our experience designing and building high quality aircraft in
order to present you an exceptional product. We chose high grade material and looked after high
end accessories in order to ensure top level outcome in terms of function, performance and
durability of the product. We are open and offer all necessary support in case you should find any
problem with your airplane.
As you are well aware this is a technical product. Due to its nature it is required if not mandatory to
read the instruction manual completely. Please follow the steps to complete your model as descri-
bed. It will ensure that your model will turn out in the best possible way. Please also take notice and
good care about the warning messages at the end of the instruction manual. Knowing about them
ensures that you can operate the model in the safest possible manner keeping risk away from you
and other persons. Also ensure that you comply with the latest legislation in terms of flight safety.
We wish you all the best for building and especially operating your RC airplane. In case you have
any questions please contact us. We are driven to offer the best possible support at any time.
Span
Length
Flying weight
Wing area
Airfoil
Motor
Ro-Power Torque 5062 305KV Outrunner (built-in)
ESC
min. Ro-Control, as of 80A (recommended)
Servos
HR: 1x FS-510 BB MG (built-in)
SR: 1x FS-510 BB MG (built-in)
QR: 2x FS-125 BB MG (built-in)
WK: 2x FS-128 BB MG (built-in)
Battery
Ro-Power as of 8S / 4200 mAh (or 2x4S) (recommended)
MPX-Plugs
built-in
TX
min. 5 Channel (recommended)
RX
min. 7 Channel (recommended)
Divers
5min ro-POXY, Loctite
UHU Por, Velcro Tape (recommended)
INTRODUCTION
SPECIFICATIONS
3500 mm
1800 mm
6470 g
80,50 dm²
HQ/W 2,5/11
ACCESSORIES
ENGLISH
11