Werbung
Verfügbare Sprachen
Verfügbare Sprachen
ENGLISH
Mount the controller directly behind the
motor and connect the cables to the motor.
Make sure that the cables can not drag on
the motor bell.
12
ASSEMBLY THE FUSELAGE
01
Thereafter, the propel-
ler blades and the spin-
ner cap are mounted
on the middle section.
The batteries are located behind the
controller in front of the wheelhouse on the
mounting board and should be secured with
Velcro straps.
03
Mount the propeller center section on the mo-
tor shaft. Pay attention to a firm but sensitive
tightening of the nut. This is an aluminum th-
read!
Now we recommend a short function check
to check the direction of rotation of the mo-
tor.
04
02
Werbung
