Electrolux IK2671BNR Benutzerinformation Seite 10

The alarm restarts 1 h after deactivation
until the normal conditions are restored.
If you do not press any button, the sound
switches off automatically after 1h.
3.10 Door open alarm
The door open alarm indicator turns on with
the sound if the fridge door is left open for 5
min. or if the freezer door is left open for 80
sec.
The alarm stops after closing the door. Press
any button to switch off the sound.
If you do not press any button, the sound
switches off automatically after 1 hour.
3.11 Setting mode
The Setting mode allows you to enable or
disable the ECOMETER indicator, the Rest
mode, the Sabbath mode, to reset the
appliance factory settings and to change the
temperature units from °C to °F.:
Activating the Setting mode
1. Press and hold the ECO button for
approx. 3 sec. The display shows blinking
.
2. Once the Setting mode is switched on,
the display shows
Press and hold the ECO button for approx. 3
sec to deactivate the Setting mode.
The Setting mode deactivates if you do not
interact with the control panel for 60 sec.
Navigating the Setting mode
Tap the fridge temperature button to change
the parameter. Tap the freezer temperature
button to change the parameter value.
Display
10 ENGLISH
.
Default parameters
ECOMETER indicator
Button sounds
Temperature units
Display
ECOMETER indicator
In order to switch the ECOMETER on or off:
1. Activate the Setting mode.
2. Tap until the display shows
the enabled or
ECOMETER indicator.
3. Exit the Setting mode.
Button sounds
To enable or disable the sounds:
1. Activate the Setting mode.
2. Tap until the display shows
to switch the sounds on or off. The
indicator will change to
enabled or for the disabled sounds.
3. Exit the Setting mode.
Temperature units
To change the temperature unit:
1. Activate the Setting mode.
2. Tap until the display shows
. Tap the indicator showing the unit to
select between
for Fahrenheit.
3. Exit the Setting mode.
Rest mode
The Rest mode ensures food preservation
while minimizing energy consumption during
periods of non operation.
To switch on the Rest mode:
1. Activate the Setting mode.
2. Tap until the display shows
. Tap to switch the Rest mode
either on or off. The indicator changes to
for the enabled or
Rest mode.
Default parameters
Sabbath mode
Rest mode
Factory settings
for
for the disabled
. Tap
for the
and
for Celsius and
and
for the disabled