Herunterladen Diese Seite drucken

HIKMICRO SP40 Kurzanleitung Seite 139

Werbung

This equipment complies with FCC radiation
exposure limits set forth for an uncontrolled
environment.
Note: This equipment has been tested and found
to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference when the
equipment is operated in a commercial
environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not
installed and used in accordance with the
instruction manual, may cause harmful
interference to radio communications. Operation
of this equipment in a residential area is likely to
cause harmful interference in which case the user
will be required to correct the interference at his
own expense.
EU Conformity Statement
This product and - if applicable - the
supplied accessories too are marked
with "CE" and comply therefore with
the applicable harmonized European standards
listed under the Directive 2014/30/EU (EMCD),
Directive 2014/35/EU (LVD), Directive 2011/65/EU
(RoHS), Directive 2014/53/EU.
Hereby, Hangzhou Microimage Software Co., Ltd.
declares that this device (refer to the label) is in
compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is
available at the following internet address:
https://www.hikmicrotech.com/en/support/downl
oad-center/declaration-of-conformity/
Frequency Bands and Power (for CE)
The frequency bands and modes and transmitting
power (radiated and/or conducted) nominal limits
applicable to the following radio equipment are as
follows:
Wi-Fi: 2.4 GHz (2.4 GHz to 2.4835 GHz):
20 dBm; 5 GHz (5.15 GHz to 5.25 GHz):
23 dBm; 5 GHz (5.725 GHz to 5.875 GHz):
14 dBm
5.15-5.25GHz indoors use.
Bluetooth: 2.4 GHz (2.4 GHz to 2.4835 GHz): 20
dBm
RF Exposure Information
This device has been tested and meets applicable
limits for Radio Frequency (RF) exposure.
For the device without a supplied power adapter,
use the power adapter provided by a qualified
manufacturer. Refer to the product specification
for detailed power requirements.
For the device without a supplied battery, use the
battery provided by a qualified manufacturer.
Refer to the product specification for detailed
battery requirements.
Directive 2012/19/EU (WEEE
Directive): Products marked with
this symbol cannot be disposed of
as unsorted municipal waste in the
European Union. For proper
recycling, return this product to your local
supplier upon the purchase of equivalent new
equipment, or dispose of it at designated
collection points. For more information see:
www.recyclethis.info.
Directive 2006/66/EC and its
amendment 2013/56/EU (Battery
Directive): This product contains
a battery that cannot be disposed
of as unsorted municipal waste
in the European Union. See the product
documentation for specific battery information.
The battery is marked with this symbol, which
may include lettering to indicate cadmium (Cd),
lead (Pb), or mercury (Hg). For proper recycling,
return the battery to your supplier or to a
designated collection point. For more
information see: www.recyclethis.info.
Warning: This is a class A product. In a domestic
environment this product may cause radio
interference in which case the user may be
required to take adequate measures.
This is a class B product. In a domestic
environment this product may cause radio
interference in which case the user may be
required to take adequate measures.
Industry Canada ICES-003 Compliance
This device meets the CAN ICES-003 (A)/NMB-
003(A) standards requirements.
For the model SP120, please note that:
This device meets the CAN ICES-003 (B) / NMB-
003 (B) standards requirements.
This device complies with Industry Canada
licence-exempt RSS standard(s). Operation is
subject to the following two conditions:
(1) this device may not cause interference, and
137

Werbung

loading

Diese Anleitung auch für:

Sp serie