Display
• When electrify the refrigerator, the display screen will total display for 3
seconds. Meanwhile the starting up bell rings and then the screen enters the
normal display of the operation.
• display of the operation.When the error occurs, the display shows the error
code (see next page); during normal running, the display shows the set
temperature of the refrigerating chamber or freezing chamber.
• Under normal circumstances, if there is no operation on display panel or door
opening action within 30s, then the display is lock, and the logo
Lock /unlock
• In the unlocked state, long press the lock button
the lock state,the logo
panel is locked, at this time, button operation cannot be implemented;
• In the locked state, long press the lock button
unlocked state, The logo
panel is unlocked, at this time, button operation can be implemented;
Temperature setting of refrigerating chamber
• Press temperature zone selection button
temperature zone of refrigerating chamber, and then press
the setting temperature of refrigerating chamber. The temperature setting
range for refrigerating chamber is 2°C ~ 8°C.
Temperature setting of freezing chamber
• Press temperature zone selection button
temperature zone of freezing chamber, and then press
setting temperature of freezing chamber.The temperature setting range for
freezing chamber is -24°C~-16°C.
Temperature setting of variable temperature chamber
• Press Variable temperature button
of the chamber, the adjusting range is Fruit/vegetable, drink and meat.
Mode setting
• Set the Super cooling mode:after the temperature of the refrigeration room is
adjusted to 2°C, press the temperature down button "
cooling mode. In the super cooling mode, the temperature of the refrigerating
chamber is automatically set to 2°C.
• Exit the Super cooling mode: press the temperature up button"
super cooling mode or automatically exit the super cooling mode after 6h.
After exiting the super cooling mode, the temperature of the refrigerator will
automatically return to the temperature set before the super cooling mode.
• Set the super freezing mode: after the temperature of the freezing chamber is
adjusted to -24°C, press the temperature down button "
freezing mode. In the super freezing mode, the temperature of the freezing
chamber is automatically set to -24°C.
• Exit the super freezing mode: press the temperature up button "
super freezing mode or automatically exit the super freezing mode after 32h.
lights up and buzzer sounds, it means the display
lights up and buzzer sounds, it means the display
09
for 3 seconds, enter
for 3 seconds, enter the
to choose the setting
or
to choose the setting
or
to adjust the
to adjust the setting temperature
" to enter the super
" to enter the super
lights up.
to adjust
" to exit the
" to exit the
EN