Operating Procedures - Hpi Racing Maverick Atom Schnellstartanleitung

2 - 3

Operating Procedures

1
Transmitter Information
1) Steering Wheel
2) Throttle Trigger
3) Steering Trim
4) Throttle Trim
5) Power Indicator
6) Power Switch
2
Switch On Radio
Turn on transmitter first and then turn on receiver.
Turn on the transmitter switch and the LED battery indicator will light up.
The Red LED will continuously show if the installed AA batteries have sufficient charge.
The Red LED will flash if the batteries need replacing.
The Green LED will flash to indicate the transmitter is ready for pairing.
Then press the button on the ESC/Receiver to power on the car.
The Green LED on both the Transmitter and Receiver will continuously show once the pairing is complete.
3
Transmitter Operation
Straight (Neutral)
Left turn
Forward
Reverse operation:
1st Time
1
2
ON
Right turn
Brake / Reverse
Stop (Neutral)
Forward → Brake Twice → Reverse
Brake Stop (Neutral)
10
4
Straight (Neutral)
Left turn
2nd Time Reverse
3
5
6
ON
Right turn