EN
INSTRUCTIONS FOR USE
IGNITION
1. Horizontal use (barbecue mode)
Adjust the settings of the device before switching it on.
•
Make sure that the tank is correctly fixed horizontally by means of the 2
•
for this purpose.
Clean the grill and rotisserie pins before first use.
•
Remove the grills
•
Arrange a first layer of charcoal over the entire surface of the fireplace. Distribute the
•
charcoal evenly, the layer of charcoal should not exceed a height of 15 cm from the bowl.
Place dry kindling, crumpled up newspaper under the charcoal.
•
It is better to light the charcoal with matches.
•
Once the first layer is correctly lit, have a second layer of charcoal to fill the tank to its
•
maximum capacity.
Leave the charcoal to burn for approximately 30 minutes. Before starting to cook, wait for a
•
layer of ash to cover the fuel. Distribute the ashes evenly in the pan.
Put the grills back in place
•
in mind that the device is very hot.
2. Vertical use (rotisserie mode)
Adjust the settings of the device before switching it on.
•
Make sure that the tank is correctly fixed vertically by means of the 2
•
this purpose.
Clean the grill and rotisserie pins before first use.
•
Remove the grill
•
Arrange your charcoal in the metal basket in the tank.
•
Place dry wood, crumpled newspaper or fire-lighters under the charcoal. It is better to light
•
the charcoal with matches.
Leave the charcoal to burn for approximately 30 minutes. Before starting to cook, wait for a
•
layer of ash to cover the fuel. Distribute the ashes evenly in the pan.
Cook food keeping in mind that the appliance is very hot.
•
28
5
6
and
.
5
6
et
and fix them in place in order to start cooking food. Keep
and make sure to fix the grill
6
correctly using screws
5
L
pins provided
L
pins provided for
B
.
26/08/2024