Werbung
Verfügbare Sprachen
Verfügbare Sprachen
1.
Press the "Timer" button while the unit is operating.
2.
The control panel shows "0".
3.
Use the "Down" (-) and "Up" (+) keys to change the setting in a range from 1 – 240
minutes. Keeping the key pressed allows the timer time to be set in 10-second
increments.
4.
When you have set the desired time, the number will ash 4 times on the control
panel.
5.
The device automatically con rms this time and the control panel will alternate
between the remaining time and the selected temperature or power level.
6.
By pressing the "Timer" button again or changing the operating mode ("Function"
button) you can deactivate the timer function, cancelling the time you have set.
7.
Once the time is up, an acoustic signal sounds and the device automatically goes
into standby mode.
PLEASE NOTE
If you have not set a timer, the appliance switches o automatically after 2 hours.
3.3.5 Panel lock
You can activate a panel lock during operation by pressing the "Lock" button for approx.
3 seconds. "Loc" will appear on the control panel. All of the buttons (except for "On/
Standby" and the "Lock" button) will be locked. You can deactivate the panel lock by
pressing the "Lock" button again.
3.3.6 Switching O
1.
Switch o the unit after use by pressing the "On/Standby" button.
2.
When the temperature of the cooker plate surface is lower than 50 °C, the display
shows „L". When the temperature of the cooker plate surface is over 50 °C, it is
displaying „H".
PLEASE NOTE
Do not place any empty cookware on the ceramic eld. Heating an empty pot or
pan activates the overheating protection and the device turns o .
Do not operate the device if it is damaged in any way or does not function properly.
The use of accessories and spare parts not recommended by the manufacturer may
lead to damage on the device and injuries.
The device's fans will continue to run for a few moments after you turn it o .
4 Cleaning and Maintenance
This chapter provides you with important notices with regard to cleaning and maintaining
the device. Please observe the notices to prevent damages due to cleaning the device
incorrectly and to ensure trouble-free operation.
CASO ProSlim 2000
DE
EN
IT
ES
FR
NL
101
Werbung
