AEG EEB230010M Benutzerinformation Seite 8

4.2 Heat settings
Knob indication
0
1 - 9
Turn the knob to set a heat setting.
4.3 Automatic heat-up (if applicable)
The automatic heat-up function heats the
cooking zone with full power for some time.
1. Turn the knob for the cooking zone
clockwise as far as possible (beyond the
highest heat setting).
2. Immediately set the necessary heat
setting.
5. BEFORE FIRST USE
WARNING!
Refer to Safety chapters.
5.1 Initial preheating and cleaning
Preheat the empty appliance before the first
use and contact with food. The appliance can
emit unpleasant smell and smoke. Ventilate
the room during preheating.
1. Remove all accessories and removable
shelf supports from the appliance.
2. Set the function
temperature. Let the appliance operate
for 1 h.
6. DAILY USE
WARNING!
Refer to Safety chapters.
8 ENGLISH
Function
Off position
Keep warm setting
Heat settings
. Set the maximum
3. To deactivate the function, turn the knob
to the off position.
4.4 Using the double zone (if
applicable)
In case the hob has its own user
interface with sensor fields the function is
controlled by the hob. Refer to Daily Use
chapters in the hob user manual.
1. To activate the double zone, turn the
knob clockwise 9. Do not turn it through
the stop position.
2. Turn the knob slowly until you can hear a
click. The two cooking zones are on.
3. To set the necessary heat setting refer to
"Heat settings".
3. Set the function
temperature. Let the appliance operate
for 15 min.
4. Set the function
temperature. Let the appliance operate
for 15 min.
5. Turn off the appliance and wait until it is
cold.
6. Clean the appliance and the accessories
only with a microfibre cloth, warm water
and a mild detergent.
7. Put the accessories and removable shelf
supports back to their initial position.
6.1 Heating functions
Light
To turn on the lamp.
. Set the maximum
. Set the maximum