Dometic Smart Touch Montage- Und Bedienungsanleitung Seite 3

English
Important notes................................................................... 3
1
Related documents...............................................................3
2
Explanation of symbols and safety instructions..........................3
3
Intended use....................................................................... 3
4
Installation and setup............................................................ 3
5
Operation........................................................................... 5
6
Disposal..............................................................................6
7
1 Important notes
Please read these instructions carefully and follow all instructions, guidelines, and warnings included in this product manual in order
to ensure that you install, use, and maintain the product properly at all times. These instructions MUST stay with this product.
By using the product, you hereby confirm that you have read all instructions, guidelines, and warnings carefully and that you under-
stand and agree to abide by the terms and conditions as set forth herein. You agree to use this product only for the intended pur-
pose and application and in accordance with the instructions, guidelines, and warnings as set forth in this product manual as well as
in accordance with all applicable laws and regulations. A failure to read and follow the instructions and warnings set forth herein may
result in an injury to yourself and others, damage to your product or damage to other property in the vicinity. This product manual,
including the instructions, guidelines, and warnings, and related documentation, may be subject to changes and updates. For up-to-
date product information, please visit documents.dometic.com.
2 Related documents
Find the installation and operating manual online on
qr.dometic.com/besUJL.
3 Explanation of symbols and safety
instructions
This manual has safety information and instructions to help you end or reduce the risk of
accidents and injuries.
3.1 Understanding signal words
WARNING!
Indicates a hazardous situation that, if not avoided, could result in death or se-
rious injury.
CAUTION!
Indicates a hazardous situation that, if not avoided, could result in minor or
moderate injury.
NOTICE!
Indicates a situation that, if not avoided, can result in property damage.
NOTE Supplementary information for operating the product.
3.2 Supplemental directives
To reduce the risk of accidents and injuries, please observe the following directives be-
fore proceeding to install or operate this appliance:
• Read and follow all safety information and instructions.
• Read and understand these instructions before installing or operating this prod-
uct.
• The installation must comply with all applicable local or national codes, including
the latest edition of the following standards:
• American Boat and Yacht Council (ABYC) E-11 AC and DC Electrical Systems on
Boats
• ANSI/NFPA70, National Electrical Code (NEC)
3.3 General safety messages
WARNING! ELECTRICAL SHOCK, FIRE, AND/ OR EXPLOSION HAZ-
ARD. Failure to obey the following warnings could result in death or
serious injury:
Service and maintenance must be done by a qualified service person only.
• Use only Dometic replacement parts and components that are specifically ap-
proved for use with the appliance.
• Avoid improper installation, change, alterations,service, or maintenance of the ap-
pliance.
• Use care when diagnosing and/or adjusting components on a powered unit.
NOTICE! Failure to obey this notice could lead to water deep-
freezing in the condenser coil which can damage to the unit.
• Do not operate the air conditioner unit in water that is cooler
than 38 °F (3.33 °C).
• Do not change this product in any way.
4 Intended use
The Dometic Smart Touch Cabin Control is a microcontroller-based unit designed for
use with direct expansion (DX), reverse-cycle air conditioner systems and and chilled wa-
ter (CW) systems.
The Smart Touch Cabin Control offers 22 programmable parameters for custom instal-
lations, including a dehumidification mode to control relative humidity and de-icing to
prevent evaporator coil icing. The system offers a nonvolatile memory that retains set-
tings without batteries and CAN-bus network capability. Optional sensors are available
for further customization.
Dometic Corporation reserves the right to change appearances and specifications with-
out notice.
The manufacturer accepts no liability for damage in the following cases:
• Faulty assembly or connection
• Damage to the product resulting from mechanical influences and excess voltage
• Alterations to the product without express permission from the manufacturer
• Use for purposes other than those described in the operating manual
5 Installation and setup
This section describes how to install and set up the Smart Touch Cabin Control.
NOTICE! The system 's built-in air sensor is located in the control dis-
play panel.
• You must locate the display on an interior wall at eye level.
• Do not locate in direct sunlight or inside a cabinet.
• If these conditions cannot be met, you must buy the optional inside air
temperature sensor and install it in the return-air stream.
• Do not use a screw gun and do not overtighten the screws when
mounting the display because either method may damage the display.
• Do not staple sensor cables when mounting.
EN
3