Maintenance And Care - Medion MD 86216 Handbuch

When the camera is connected to the computer
for the first time, no new hardware is found
The USB connection of the computer is deactivated in the BIOS.

Enable the port in the computer's BIOS. Refer to the PC manual
if necessary.

Maintenance and care


Clean the housing, lens and the display as follows:

Clean the camera housing using a soft, dry cloth.

Do not use thinners or cleaning solutions that contain oil. This
could damage the camera.

Use a lens brush to remove dust before cleaning the lens or the
display. Then wipe them with a soft cloth. Do not apply
pressure to the display and do not use hard objects to clean it.

Do not use strong cleaning solutions for the housing and the
lens (contact your dealer if dirt cannot be removed).
EN
57