Exposure correction
By correcting the exposure values (EV, exposure value) you can
adjust pictures that are too dark or too light.
You can set the value in nine stages between +2.0 EV and -2.0 EV.
The following bar chart appears on the display:
Use a positive value when light conditions are poor and a negative
value in strong light.
Do not use the exposure correction when the subject is in a very
bright or very dark area or if you are using the flash. Select this
setting.
Shooting mode
In the "recording mode" menu you can switch between video and
audio recordings.
► Select
to start an audio recording.
► Select
to continue with video recording.
34