Master/Slave Operation - EuroLite LED PSU-10A Artnet/DMX Bedienungsanleitung

MODE button SETUP button
Address setting
DMX MODE
Channel setting
Select LED tube
Red dimmer
DIMMER
Green dimmer
MODE
Blue dimmer
Strobe effect
Select program
SOUND
Sensitivity
MODE
setting
Fade programs
AUTO
Color change
MODE
Speed setting
STATIC
Select LED tube
COLOR
SELECT
Color select
MODE
Strobe effect
Display on/off
OTHER
Selecting
SETTINGS
LED Tube type
Default
IP address
setting
ART-NET
CONTROL
MODE
Subnet mask
setting
DMX universe
output setting
Please note: After the controller IP address has been changed, you have to restart the controller to make
this change effective.
Please note: When the controller is set to control 0.5 m and 1.0 m LED tubes, the set up on the output DMX
universe 2 is invalid. Only when the controller is set to control 1.5 m LED tubes is the output DMX universe 2
valid.

Master/Slave operation

The master/slave operation enables that several devices can be synchronized and controlled by one master
device.
UP/DOWN buttons
DMX MODE ADDR:XXX
DMX MODE CHAN: 005
DMX MODE CHAN: 007
DMX MODE CHAN: 032
DMX MODE CHAN:
210 / 468 / 480
MANUAL TUBE:ALL/XX
MANUAL TUBE:01~10
MANUAL RED:XXX
MANUAL GREN:XXX
MANUAL BLUE:XXX
MANUAL FLASH:XX
SOUND PROG:XX
SOUND SENS:XX
AUTO RUN FADE:XX
AUTO RUN JUMP:XX
AUTO RUN SPEED:XX
STATIC TUBE:ALL/XX
STATIC TUBE:01~10
STATIC CLR:XX
STATIC FLASH:XX
OPTION BLGT:ON
OPTION BLGT:OFF
OPTION TUBES:5
OPTION TUBES:10
OPTION TUBES:15
OPTION SYSRESET
NET MODE IP0:
000-255
NET MODE IP1:
000-255
NET MODE IP2:
000-255
NET MODE IP3:
000-255
NET MODE SW0: 000-255
NET MODE SW1: 000-255
NET MODE SW2: 000-255
NET MODE SW3: 000-255
NET MODE U1:
0 - 16
NET MODE U2:
0 - 16
25/32
Sets the DMX starting address
5-channel mode
7-channel mode
32-channel mode
When controlling 0.5 meter tubes, the unit occupies 210
channels;
When controlling 1.0 meter tubes, the unit occupies 480
channels;
When controlling 1.5 meter tubes, the unit occupies 468
channels
Dims all the LED tubes
Dims the corresponding single LED tube
Red intensity from 000 - 255
Green intensity from 000 - 255
Blue intensity from 000 - 255
Speed steps 00 ~ 15 with increasing speed
Select from 24 built-in sound controlled programs
Steps 01 ~ 08 with increasing sensitivity.
Select from the 24 built-in fade programs
Select from the 24 built-in color change programs
Speed steps 01 ~ 16 with increasing speed
Sets one static color on all the LED tubes
Sets a static color on the corresponding single LED tube
Select from 7 static colors 00 ~ 07
Speed steps 00 ~ 15 with increasing speed
Display backlight always on
Display backlight off after 20 seconds of no operation
Controls 0.5 meter tubes
Controls 1 meter tubes
Controls 1.5 meter tubes
When display backlight flickers, press UP/DOWN
buttons at the same time to initialize factory settings
Setting the IP address section 1
Setting the IP address section 2
Setting the IP address section 3
Setting the IP address section 4
Setting the subnet mask section 1
Setting the subnet mask section 2
Setting the subnet mask section 3
Setting the subnet mask section 4
Setting the DMX universe output section 1
Setting the DMX universe output section 2
Function
00088351, Version 1.1