Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Browse through the menu by pressing the Mode button. Press the Setup button in order to select the desired
submenu. You can change the selection by pressing the Up or Down buttons. You can leave every mode by
pressing the Mode-button.
DMX mode
CH5 is 5-channel mode; CH7 is 7-channel mode; CH32 is 32-channel mode; CH210/468/480 incorporates
three modes, depending upon the LED tubes used.
Dimmer Mode
Here you can manually select the desired static color and its intensity.
Sound-active Mode
Here you can select from 24 internal programs.
Auto-run program Mode
Here you can select from 24 internal switching color and 24 fading color programs and also set the program
speed.
Static Color Select Mode
Here you can manually select the desired static color and strobe effect.
Other program select Mode
Here you can select the desired display on the control board or set the device to default.
Art-Net Mode
Here you can link the controller to Art-Net for flexible control. Both Art-Net sockets can function either as In
(receiving) or Out (sending).
Please note: The controller can be operated with any lighting control software supporting the DMX512
protocol. For convenient control, the lighting control software MADRIX is recommended (see Technical
specification/Accessories).
See following graphic for setting details.
24/32
00088351, Version 1.1
Werbung
Inhaltsverzeichnis
