Werbung
Verfügbare Sprachen
Verfügbare Sprachen
z
Calling functions
Entry of IP addresses to be dialled
If supported by the system and the terminal, dialling can also take place using the IP address.
Use the star button to enter the dot.
Start IP address input
Making a switchboard call
Pressing the yellow "i" key on the direct-dial keypad module connects the switchboard call defined in the call destinations.
This function can be used to define a central information point for visitors.
Direct dialling of the phone num-
ber defined under switchboard-call
Calling:
=> [116]
Please wait...
>>>>>>>>>
Entering short dial numbers
The short dial function can be use to dial call destination entries
directly. Attention: The first short dial number is at 00 and refers
to call destination entry 001. Speed dial 99 = index 100.
Start entering short dial
number
Short dial:
>-- [00..99]
Display with display call module connected (not needed to execute the function).
8
192 168 1 1
Enter IP address to dial
Display with display call module connected (not needed to execute the function).
The phone number stored after phone number index 116 will be called.
00
Enter short dial number and start
dialling
Short dial:
>00 [00..99]
Subject to technical changes
00 =
99 =
Miller
Complete entry and start dialling
Please wait...
>>>>>>>>>
Werbung
