Keyboard - Storch DEWCHECK TRF-DATA Bedienungsanleitung

1

KEYBOARD

The keyboard has 5 buttons. Their function depends on the specific mode the instrument is at the
time.
In measuringmode the gauge operates like a standard dewpointgauge , readings can be frozen
on the display but cannot be stored.
Pressing the arrow buttons (=> <=) simultaneously the instrument enters the menumode.
In menumode the settings of the instrument can be set guided by an users menu.
<=
=>
Hold ↵
ON
OFF
To the left through the selection of
menu-items or settings.
To the right through the selection of menu-items
or settings.
Left – and right arrow simultaneously for menumode.
In measuringmode this button freeze the actual
measurements on the LCD (HOLD)
If the memory is activated (ON) the measurements
will be saved in the memory
Switches the instrument ON in the measuringmode.
Once the instrument is ON with this button the LCD
and keyboard illumination can be switched on/off.
The illumination switches off automatically after
approx. 40 sec.
In measuringmode: Switch off the instrument.
In menumode: Pull back from a menu-option
or cancel a choice without storing data.
(acts like an escape key)
35 35 35 35 35