AWG M2 Originalbetriebsanleitung Seite 34

AWG | Fittings | Medium expansion foam nozzle M2, M4, M8
6 Functional test
6 .1 Prerequisites
All testing of the AWG Medium expansion foam nozzles M2, M4 and M8
must be carried out in accordance with the manufacturer's technical do-
cumentation and must be documented if necessary.
The following inspections are defined for the foam nozzles:
– Mandatory BASIC Inspection after each use
– Mandatory STANDARD Inspection every 12 months
– Optional ADVANCED Inspection every 12 months
The STANDARD and ADVANCED inspections may only be carried out by
qualified personnel who have been trained for these inspections:
– Firefighters who have received training as firefighting equipment
maintenance technicians or persons with equivalent qualifications
– Or, if desired, directly by the manufacturer
Inspection by the manufacturer
AWG Fittings GmbH offers an inspection as part of its service offering.
Send us the foam nozzle and you will receive the inspected device back
by the agreed date. You will find a return delivery form on our website
www.awg-fittings.com. If required, a rental device can also be provided.
M1107B10 | Rev. 03-08/24
Documenting the inspection result
To meet the requirements for occupational safety and acci-
dent prevention, the test results for each test must be docu-
mented. Please observe the country-specific regulations.
In Germany, the guidelines of the DGUV (Deutsche Gesetz-
liche Unfallversicherung e.V. [German Statutory Accident
Insurance]) apply. A product specific test chart in accordan-
ce with the DGUV can be downloaded from www.awg-fit-
tings.com
– Keep the documented test result as proof.
FUNCTIONAL TEST
34