AWG M2 Originalbetriebsanleitung Seite 25

AWG | Fittings | Medium expansion foam nozzle M2, M4, M8
2 Safety information
The AWG Medium expansion foam nozzles M2, M4 and M8 are in line
with the state of the art as well as the recognised safety regulations. The
safety and health protection requirements have been met. Nevertheless,
their use may give rise to hazards for the user or third parties or cause
damage to the device itself or other material assets.
2 .1 General safety notes
>
The device may only be operated in accordance with these instructions
and in perfect condition.
>
The operators must have received the necessary training to be able
to handle the device properly.
>
Unauthorized modifications or the installation of additional com ponents
not approved by the manufacturer endanger the proper functioning of
the device.
– Modifications to the device are prohibited
– Only use accessories approved by the manufacturer
>
The operator is responsible for safety in the vicinity of the device, in
particular for compliance with the general safety regulations. This in-
cludes ensuring, before switching on the entire extinguishing system,
that all protective devices are fully in place and functional.
2 .2 Safety during operation
>
Observe all safety rules and protective measures applicable for use
at the place of use.
>
Make sure the device does not get damaged during transport, instal-
lation, commissioning, operation or maintenance.
>
The safety regulations laid down in the country-specific service regulati-
ons for firefighters (for example in Germany the Feuerwehr dienstvorschrift
FwDV) or the corresponding internal company re gulations must be
observed.
25
SAFETy INFORMATION
M1107B10 | Rev. 03-08/24