Opening Connection; Programming Testo 845 - Testo 845 Bedienungsanleitung

40 7. Programming

7.4 Opening connection

Double-click on the connection to be opened in the window
Archive.
If a measurement protocol has been stored in the testo 845, the protocol
symbol and the short title of the protocol appear under the opened connec-
tion.
Using o o ne c c onnection f f or s s everal t t esto 8 8 45
You can connect different testo 845 via one connection. When the testo
845 is changed, the connection must be broken and then re-made for the
new testo 845, otherwise the software will not be able to identify it.

7.5 Programming testo 845

Programming deletes all values stored in testo 845.
Read any existing data out of the testo 845 before programming (see
instruction manual for the software testo ComSoft).
Select the function device control in the menu bar Instrument .
This function is only active when the name of the connection is marked in
colour. If this is not the case:
First click on the name of the connection and then Instrument > device
control .
- The window for programming the testo 845 opens.
7.5.1 Programming testo 845
Instrument
Date and time:
The set date and time of the testo 845 are displayed.
To synchronize the date and time with the clock in your PC, select
synchronize .
Options
Set degree of emission. Mark displayed value and alter.
Set unit °C/°F.