Printing Measurement Protocols; Printing Current Readings; Reading Memory Full - Testo 845 Bedienungsanleitung

38 6. Setting instrument

6.5 Printing measurement protocols

In this chapter, the printing of measurement protocols is explained
1
Printing m m easurement p p rotocols:
The instrument is in measurement display (Hold mode).
Hold down
Select stored measurement protocol with
Measurement protocol values are displayed.
View further stored measurement protocols with
Start printout with
Return to memory menu with
The IR diode is situated on the front of the testo 845. Point the
testo 845 at the printer.
Return to measurement menu with
The configuration menu can be exited at any time. To do this, press
. Instrument switches to measurement display. Changes already
carried out in the configuration menu are stored.

6.6 Printing current readings

In this chapter, the printing of current readings is explained
1
Printing c c urrent v v alues:
The instrument is in measurement display (Hold mode).
Start printout with

6.7 Reading memory full

When 90 measurement protocols have been stored, FULL is displayed. Delete
reading memory as required.
and press . Call up memory menu.
.
.
/ and confirm with
.
.
/ .
.