JETI model DUPLEX EX Bedienungsanleitung Seite 15

supply. In the ready status, you can view the data from the last
measurement. Measurement data means the maximum relative
height reached during motor run and 10s after that and 10 relative
altitude values saved after 1s of motor run.
The receiver can be in the Ready status if the "motor shutdown
pulse" is not exceeded after connecting the power supply.
The receiver will be in the Running status if the throttle control
pulse exceeds the motor shutdown pulse level. After stopping the
motor the receiver goes from the Running status to the Measuring
status and evaluates the measurement for another 10s.
The motor is shutdown if:
Set height is reached
●
Set time is reached
●
The throttle lever has been pulled below the set level
●
The motor will be stopped, whichever occurs first (terms above).
After stopping the motor, the motor cannot be restarted until the
receiver power is disconnected and connected again and the
receiver returns to the Ready status.
To calculate the height is used the sea level pressure
1013,25 hPa - ISA (International Standard Atmosphere)
COMPLEX RADIO CONTROL SYSTEM
15