Herunterladen Diese Seite drucken

Yamaha portatrone PSR-8000 Bedienungsanleitung Seite 181

Werbung

00001001
04
Sub-ID #1=Device Control Message
00000001
01
Sub-ID #2=Master Volume
0sssssss
SS
Volume LSB
0ttttttt
TT
Volume MSB
11110111
F7
End of Exclusive
The volume for all channels will be changed simultaneously.
The TT value is used as the MIDI Master Volume value. (the ss value is ignored.)
(3-6-2-2) UNIVERSAL NON REALTIME MESSAGE
(3-6-2-2-1) GENERAL MIDI SYSTEM ON
binary
hexadecimal
11110000
F0
Exclusive status
01111110
7E
Universal Non-Realtime
01111111
7F
ID of target Device
00001001
09
Sub-ID #1=General MIDI Message
00000001
01
Sub-ID #2=General MIDI On
11110111
F7
End of Exclusive
or
11110000
F0
Exclusive status
01111110
7E
Universal Non-Realtime
0xxxnnnn
XN
When N is received N=0-F, whichever is received.
When N is transmitted N always=0.
X = don't care
00001001
09
Sub-ID #1=General MIDI Message
00000001
01
Sub-ID #2=General MIDI On
11110111
F7
End of Exclusive
Depending upon the received ON message, the SYSTEM MODE will be changed to XG.
Except MIDI Master Tuning, all control data be reset to default values.
This message requires approximately 50ms to execute, so sufficient time should be
allowed before the next message is sent.
(3-6-3) XG STANDARD
(3-6-3-1) XG PARAMETER CHANGE
(3-6-3-1-1) XG SYSTEM ON
binary
hexadecimal
11110000
F0
Exclusive status
01000011
43
YAMAHA ID
0001nnnn
1N
Device Number
(When N is received N=0-F, whichever is received.
When N is transmitted N always=0.)
01001100
4C
Model ID
00000000
00
Address High
00000000
00
Address Mid
01111110
7E
Address Low
00000000
00
Data
11110111
F7
End of Exclusive
Depending upon the received ON message, the SYSTEM MODE will be changed to
XG.Controllers will be reset, all values of Multi Part and Effect, and All System values
denoted by "XG" data within All System will be reset to default values in the table.
This message requires approximately 50ms to execute, so sufficient time should be
allowed before the next message is sent.
(3-6-3-1-2) XG PARMETER CHANGE
binary
hexadecimal
11110000
F0
Exclusive status
01000011
43
YAMAHA ID
0001nnnn
1N
Device Number
(When N is received N=0-F, whichever is received.
When N is transmitted N always=0.)
01001100
4C
Model ID
0aaaaaaa
AA
Address High
0aaaaaaa
AA
Address Mid
0aaaaaaa
AA
Address Low
0ddddddd
DD
Data
|
|
11110111
F7
End of Exclusive
For parameters with data size of 2 or 4, transmit the appropriate number of data bytes.
For more information on Address and Parameters, refer to < Table 1-2 > ~ < Table
1-10 > (pages 183-188).
The 9 data types listed below are transmitted and received.
(These are transmitted only after a Parameter change request is received.)
1) XG System on
2) XG System parameter change
3) XG Multi Effect1 parameter change
4) XG Multi EQ parameter change
5) XG Multi Effect2 parameter change
6) XG Special Effect parameter change
7) XG Multi Part parameter change
8) XG A/D Part parameter change
9) XG Drum Setup parameter change
MIDI Data Format / MIDI-Datenformat / Format des données MIDI
(3-6-3-2) XG BULK DUMP
binary
hexadecimal
11110000
F0
Exclusive status
01000011
43
YAMAHA ID
0000nnnn
0N
Device Number
(When N is received N=0-F, whichever is received.
When N is transmitted N always=0.)
01001100
4C
Model ID
0bbbbbbb
BB
ByteCount
0bbbbbbb
BB
ByteCount
0aaaaaaa
AA
Address High
0aaaaaaa
AA
Address Mid
0aaaaaaa
AA
Address Low
0ddddddd
DD
Data
|
|
0ccccccc
CC
Check sum
11110111
F7
End of Exclusive
For more information on Address and Byte Count, refer to < Table 1-2 > ~ < Table 1-10>
(pages 183-188).
The Check Sum value is set such that the sum of Byte Count, Address, Data, and
Check Sum has value zero in its seven least significant bits.
If the top of the block is appointed to the Address the XG Bulk Dump, Bulk Request
will be received.
The Block is a unit that consists of the data, arranged in the list, as the Total Size.
The 9 data types listed below are transmitted and received.
(These are transmitted only after a Bulk Dump request is received.)
2) XG System bulk dump
3) XG System Information bulk dump
4) XG Multi Effect1 bulk dump
5) XG Multi EQ bulk dump
6) XG Multi Effect2 bulk dump
7) XG Special Effect bulk dump
8) XG Multi Part bulk dump
9) XG A/D Part bulk dump
10) XG Drum Setup bulk dump
(3-6-3-3) XG PARAMETER REQUEST (Receive only)
binary
hexadecimal
11110000
F0
Exclusive status
01000011
43
YAMAHA ID
0011nnnn
3n
Device Number
(When N is received N=0-F, whichever is received.)
01001100
4C
Model ID
0aaaaaaa
AA
Address High
0aaaaaaa
AA
Address Mid
0aaaaaaa
AA
Address Low
11110111
F7
End of Exclusive
For more information on Address and Byte Count refer to < Table 1-2 > ~ < Table
1-10 > (pages 183-188).
The 8 data types listed below are received.
1) XG System parameter
2) XG Multi Effect1 parameter
3) XG Multi EQ parameter
4) XG Multi Effect2 parameter
5) XG Special Effect parameter
6) XG Multi Part parameter *
7) XG A/D Part parameter
8) XG Drum Setup parameter
* MIDI Receive Mode only effective in XG/GM mode.
(3-6-3-4) XG DUMP REQUEST (Receive only)
binary
hexadecimal
11110000
F0
Exclusive status
01000011
43
YAMAHA ID
0010nnnn
2n
Device Number
(When N is received N=0-F, whichever is received.)
01001100
4C
Model ID
0aaaaaaa
AA
Address High
0aaaaaaa
AA
Address Mid
0aaaaaaa
AA
Address Low
11110111
F7
End of Exclusive
For more information on Address and Byte Count refer to < Table 1-2 > ~ < Table 1-10>
(pages 183-188).
The 9 data types listed below are received.
1) XG System block
2) XG System Information block
3) XG Multi Effect1 block
4) XG Multi EQ block
5) XG Multi Effect2 block
6) XG Special Effect block
7) XG Multi Part block *
8) XG A/D Part block
9) XG Drum Setup block
* MIDI Receive Mode only effective in XG/GM mode.
181

Quicklinks ausblenden:

Werbung

loading