Maintenance And Cleaning - Eden Rca 25 Gebrauchsanleitung

Calibrating the unit
• Calibration range: It is possible to calibrate the unit by plus 3°C and minus 3 °C.
• The calibration controller protrudes out of the different-coloured temperature controller.
There are 3 fixed positions in the plus and minus range. Each position corresponds to ap-
prox. 1 degree centigrade.
• Do not attempt to go outside the calibration range.
How to proceed:
• Use a screwdriver for the calibration or break the supplied tool out of the holder.
• Measured temperature is too high: Keep the temperature controller at the set value and
move the calibration controller in the direction of - (minus).
• Measured temperature is too low: Keep the temperature controller at the set value and
move the calibration controller in the direction of + (plus).

Maintenance and cleaning

If necessary, clean the unit with clear water using a soft sponge or cloth.
• Do not not use cleaning agents or chemical solutions.
DE
EN
FR
NL
ES
PT
IT
DA
NO
SV
FI
HU
HUP0006
PL
CS
SK
SL
HR
RO
BG
UK
RU
ZH
13