Installation And Connection - Eden Rca 25 Gebrauchsanleitung

Installation and connection


The desired water temperature can only be achieved if the heating capacity of the heater
is suitable for the volume of water in the aquarium and is positioned in an area with
good water circulation. (→ Recommended heating power)
• Ensure that the unit is immersed in water at least up to the minimum immersion depth
marking.
• The unit can be completely immersed in water.
• Turn the temperature controller to the desired temperature value.
• Insert the supplied suction cups into the holder by twisting.
– Pay attention to the alignment of the tabs (they should point upwards or to the side).
• Clamp the holder to the unit.
• Position the unit with the heating element pointing towards the floor of the filled aquarium
on a clean, smooth surface in an area with good water circulation.
DE
EN
FR
NL
ES
PT
IT
DA
NO
SV
FI
HU
PL
CS
SK
SL
HR
HUP0005
RO
BG
UK
RU
ZH
11