Werbung
Contents
1.
Notes on documentation
1.1
Declarations of conformity
and approvals
1.2
Storing the documents
1.3
Symbols used
1.4
Other applicable documents
1.5
Normative references
1.6
Country-specific references
2.
Safety instructions
2.1
Intended use
2.2
User groups to
IEC 62 368
2.3
Safety instructions
– Explanation of
safety symbols
3.
Device description
3.1
Function description
and components
3.2
Labelling
3.3
Scope of delivery
4.
Assembly and siting
4.1
Site requirements
4.2
Required tools
4.3
Assembly procedure
4.3.1
Releasing the packing bands
and unpacking
4.3.2
Reading the instructions
4.3.3
Removing the
enclosure panels
– Dismantling the
aluminium front doors
– Dismantling the rear doors
– Dismantling the side panels
Schranksystem VX IT / VX IT enclosure system / Baies VX IT
Page
6
4.3.4
Removing any accessories
supplied loose
6
4.3.5
Lifting the rack off of the pallet
6
4.3.6
Moving the rack to
the installation site
6
4.3.7
Preparing for installation
6
– Depth adjustment of the
6
482.6 mm (19˝) level
6
– Width adjustment of the
7 – 37
482.6 mm (19˝) level
7 – 29
– Moving the swing frame
– Swing frame –
7 – 29
Swapping the hinges
7 – 29
4.3.8
Baying the rack (optional)
4.3.9
Securing the rack to the floor
30 – 37
4.3.10 Installing/modifying
38 – 42
gland plates (optional)
4.3.11 Re-installing the removed
38
enclosure panels
39
– Fitting the rear doors
40 – 42
– Fitting the rear panel
43 – 70
– Fitting the side panels
43
– Fitting the aluminium front door –
43
r/h door hinge
44 – 70
– Fitting the aluminium front door –
l/h door hinge (swapping hinge
44
to opposite side)
44
– Fitting the sheet steel door –
l/h door hinge (swapping hinge
45 – 47
to opposite side)
5.
Transport
45
6.
Installation
46
6.1
Installing the
47
customer hardware
6.2
Installing the power and
network cables
– Cable entry in the roof
– Dismantling/assembling of
the roof plate (optional)
– Venting the roof plate (optional)
Page
6.3
Protective earthing
48
6.3.1
Overview of parts without electri cally
48
conductive connection
6.3.2
Overview of connection points for
49
protective earthing
50 – 61
6.3.3
Accessories for provision of
protective earthing
51 – 56
7.
Commissioning
8.
Operation
57 – 59
9.
Troubleshooting
60
10.
Inspection and maintenance
11.
Storage and disposal
61
12.
Technical
62
specifications
63
– 482.6 mm (19˝) mounting
angles, standard
64
– 482.6 mm (19˝) mounting
angles, dynamic
65 – 70
– Empty enclosure
65
13.
Spare parts
66
14.
Warranty
66
15.
Customer services addresses
67
68 – 69
70
71
72 – 86
72 – 80
81 – 82
81
82
83
Page
84
84
85
86
87
87 – 88
88
89
89
90 – 96
90 – 92
93 – 95
95 – 96
97
97
97
3
Werbung
