7
Operation
7.1. Counting coins and counters of one face value
Set the corresponding diameter of a coin
Set the corresponding thickness of a coin
Put coins of one face value in the hopper
Start the counter, pressing " START " button.
Coins will get in the stacker hopper for counted coins and the result will be shown on the
display.
Repeat the procedure until there no coins in the hopper
7.2. Summing up of coins and counters of one face value
Set proper diameter of a coin
Set proper thickness of a coin
Put coins of one face value in the hopper
Press "ADD" button. Indicator will light. Start counter by pressing START button.
Coins will get in the stacker hopper for counted coins and the result will be shown on the
display Fig. 1-8
The counter will runs 3 operating cycles and stop. Press "START" again. Repeat the
procedure until there are no coins in the hopper.
Add new coins when necessary. To exit sum up mode press ADD and CLR buttons to
reset the display value.
7.3.Batch operation mode with equal face value coins.
(mode of counting a specified number of coins)
Set the corresponding diameter of a coin
Set the corresponding thickness of a coin
Put coins of one face value in the hopper
Enter the number of coins to be counted. Press "BAT" button on control panel the nec-
essary number of times.
The indicator will light. (BAT) Using buttons "-1" ,"+1", "-10", "+10" you can set the nec-
essary amount. Set by pressing "BM " button the value of batch which will be stored.
New value is stored during all further operation
Start the counter by pressing "START" button.
Coins will get in the stacker hopper for counted coins and the result will be shown on the
display Fig 1-8.
The counter will run 3 operating cycles and stop. Press "START" again. Repeat the pro-
cedure until there no more coins in the hopper.
Add more coins when necessary.
7.4. Sort mode of different coins and counters.
Sorting coins by face values should be started from the biggest coin!
Set the biggest diameter of a coin
Set the biggest thickness of a coin
18