Memory Management - Defelsko Positector Rtr H Gebrauchsanweisung

Touch
Allows the touch screen functionality to be disabled. All gage
functions can also be controlled using the navigation buttons.
Set Clock
All measurements are date and time stamped (24-hour format)
when stored into memory. It is therefore important to set the
correct date and time. Use the
value, and the
and time setting can also be viewed at the top of the main menu.
Battery Type
Selects the type of batteries used in the Gage from a choice of
"Alkaline", "Lithium" or "NiMH" (nickel-metal hydride rechargeable).
The battery state indicator symbol is calibrated for the selected
battery type. No damage will occur if the battery type used in the
Gage does not match the selected battery type.
A statistical summary will appear on the display. Remove the last
reading by pressing the
– Average
– Maximum Value
The PosiTector
measurement data. Stored measurements can be reviewed
on-screen or accessed via computers, tablets, and smart phones.
Measurements are date and time-stamped.
Standard models store up to 1,000 readings in one batch.
Advanced models store 250,000 readings in up to 1,000
batches. "New Batch" closes any currently opened batch and
creates a new batch name using the lowest available number.
The icon appears. New batches are date stamped when they
are created.
and buttons to adjust it. The current date
Statistics Mode
button. Press

Memory Management

has internal memory storage for recording
11
and buttons to select a
to clear statistics.
– Standard Deviation
– Minimum Value