Setup Menu - Defelsko Positector Rtr H Gebrauchsanweisung

Units
Converts the display from thou/mils to microns and vice versa.
Reset
Reset (menu reset) restores factory settings and returns the Gage
to a known condition. The following occurs:
- All batches, batch names, and screen captures are erased.
- Menu settings are returned to the following:
Memory = OFF
Statistics = OFF
Display = None
Auto Dim = ON
Tape Grade = XC
Perform a more thorough Hard Reset as follows:
1. Power down the Gage and wait 5 seconds.
2. Simultaneously press and hold the
until the Reset symbol
This returns the Gage to a known, "out-of-the-box" condition. It
performs the same function as a menu Reset with the addition of:
- Bluetooth Pairing info is cleared.
- Menu settings are returned to the following:
Units = Microns
Flip Lock = OFF
Sound = Medium
Touch = ON
Language = English
NOTE:
Date, Time and WiFi are not affected by either Reset.
Sound
Adjusts the volume of built-in speaker (Off, Low, Medium, High).
Flip Lock
Disables the Auto Rotate feature by locking the display in its
current orientation.

Setup Menu

Conversion (Linearize) = ON
Bluetooth Classic = OFF
WiFi & Access Point = OFF
Keyboard & Stream = OFF
appears.
Battery Type = Alkaline
Backlight = Normal
USB Drive = ON
Auto Sync .net = ON
Bluetooth = OFF
10
and buttons