Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EN
OPERATING INSTRUCTIONS –
FOR OPTIMAL SLEEP
BED ADJUSTMENT FUNCTIONS
Adjustable bed frames without
motorised adjustment
Adjustment is achieved by pulling up on the
plastic loop at each end of the bed.
Please ensure that the locking mechanism of
the adjustment mechanism engages correctly
at the same height. You can reset it by lifting
the adjustment mechanism up to the end stop
and lowering it slowly.
Adjustable bed frames with
motorised adjustment
Adjustment is motorised by operating the
handset.
Please observe the information given on the
handset and the further explanations in the re-
levant operating instructions. Note: Do not sit
or stand on the extended head or foot section.
manual
motorised
motorised
12
EMERGENCY LOWERING
The 9 V block batteries included in the package enable a single emer-
gency lowering. For safety reasons, we recommend replacing the batte-
ries after each emergency lowering, but at the latest after 1 year, as the
battery capacity then decreases.
2- or 4-motor bed systems with wired handset
Emergency lowering by pressing the button on the handset.
2-motor bed systems with wireless remote control
Emergency lowering by pressing the button on the handset, only works
if the battery has been connected to the motor beforehand.
4-motor bed systems with wireless remote control
Emergency lowering by pressing the black toggle switch on the rectan-
gular control box. Please refer to the separate instructions.
Motorised bed systems with frame-integrated drive technology
Emergency lowering by pulling the red tab on the motor. Please refer to
our separate instructions.
MASSAGE UNIT (OPTIONAL)
Many Froli motorised frames can be optionally equipped with massage
units. A gentle vibration massage treats your body and muscles, serves
as a relaxing sleep aid and promotes mobility and body balance. Vari-
ous programmes soothe tension and help perfect regeneration. Please
observe the information on the massage unit and further explanations
in the relevant operating instructions. When using the massage unit,
noises may occur due to vibration. This is not a quality defect but is
of a technical nature. Moving the motor frame to a slightly different
position can often reduce the noise. Please also make sure that metal
parts of the motor frame are not in contact with the connecting cable
or bed base.
31
Werbung
