Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EN
INSTALLATION TIPS –
FOR THE PERFECT ASSEMBLY
•
When fitting your bed frame into a standard
bed base, make sure that there are at least
6 fixing points on the long sides of the
Froli bed system to ensure a non-slip base.
•
The Froli frame must be placed on a horizon-
tal surface to avoid tensioning the fittings.
•
In the case of motorised adjustable frames,
the cables must be routed so that they are
not pinched or bent between the mechani-
cal adjustments.
•
For adjustable frames, all transport locks
must be removed before initial use. Check
carefully that all cable ties have been remo-
ved, otherwise the motors or the frame
maybe damaged.
•
For bed frames with floor transformer: Remo-
ve the cable ties from the transformer and
place the unit under the bed on the floor.
THE ORIGINAL
FROM FROLI
INDIVIDUAL
FIRMNESS ADJUSTMENT
FOR LORDOSIS SUPPORT
Froli bed systems allow for softer shoul-
der and neck support, efficient support
of the lumbar region of the back and
individual firmness adjustment by ap-
plying lordosis inserts, lordosis sup-
ports, or tension clips.
These lordosis supports are options avai-
lable at your authorised Froli represen-
tative or online at www.froli.com/shop
MAKE YOUR INDIVIDUAL SETTINGS AS FOLLOWS:
Froli Viado:
The Viado spring element can be set to „soft",
„medium" or „hard" by turning the inner ring.
Froli Forti und Zona:
Push the lumbar insert into the space between
the spring elements until it clicks into place.
Depending on the desired firmness, 1 or 2 lum-
bar inserts can be used per spring element.
Froli Sentina:
Clip the firmness cross into the centre of the
desired spring elements by hooking the 4 lo-
cking knobs into the 4 upper tabs of the spring
element.
Froli Viado:
Froli Forti
Froli Zona:
Froli Sentina
THE PRECISE DEGREE OF FIRMNESS ADJUSTMENT
Normal
firmness
Shoulder zone
with soft fibre
elements
Individual
lumbar
support zone
Normal
firmness level
Example illustration: Rotation adjustment,
lumbar inserts and firmness crosses can be
used with any spring element.
The soft spring elements of the shoulder
zone can also be offset.
FROLI COMPLETE BEDS
For Viado, Forti and Zona, the bed frame,
headboard and bed legs can be assembled.
Thanks to the innovative connection technolo-
gy, they form a stable and visually elegant bed
system and visually elegant bed system.
27
Werbung
