Werbung
Verfügbare Sprachen
Verfügbare Sprachen
PROGRAMMING
2 C21:
Stondord
Channel table
:
Channel
Search
Standard
Channel Table
Channet
Fine Tuning
Name
Mode
Decoder
Channel tabie:
* In order to get the correct channel table, select the
"Channel table" item. Change the channel table by
pressing Cursor "<1" and / or ">" buttons. The selec-
tion toggles between C and S transmission standards.
Channel:
* In order to tune the correct channel, select the "Chan- |
nel" item. Using digit buttons directly or "<)" or "D>"
buttons you can change the tuned channel.
Fine tunning:
4
* In order to perform fine tunning select "Fine tunning
item. In some situations (e.g. non standard signals) it
can be necessary to manually fine tune the program.
Name:
ein order to change the program name, select the |
popeeies sree ey
coder" item. Select "ON" by using "<J" or "l" buttons.
Decoder is set "ON" or "OFF" for each program indi-
vidually.
| * in order to connect a decoder to your TV select "De-
t
Note:
* Repeat the steps of manual programming described
above if you want to store other channels
« If you have finished storing TV channels press '(@)" to
| goto upper menus, or press the ''T" buttan to turn off
| the menu completely.
| ¢ In order to store any channel to program 0; firstly pro-
i
gram 0 has to be selected and then the desired chan-
nel be entered.
Change Order:
In order to edit the program list you should enter "CHANGE
ORDER" menu.
To access "CHANGE ORDER" menu first enter "MAIN
MENU". Then enter "INSTALLATION" menu and select
"CHANGE ORDER' menu. You can change and delete
the programs on the list, according to your order prefer-
ence. The following menu will appear:
You can select the programs in the program list by press-
i ing"A"/"Y" or "<? /"C>"" buttons on the remote control,
Whenever you select a program from the list, color of the
, selected program item will change and this program will
be displayed on the screen
i
INSTALLATION |
fi MENU LANGUAGE.
COUNTRY...
PROGRAMMING.
H a
i
EXECUTION APS.
"Name" item. Each program can be named with 5 | Change
characters. At this field the name or program can be
filled in. When you reach this line press the "OK" but-
ton then a cursor will appear for the selected charac-
ter. Move the cursor to the character, you want to |
First select the program you want to change by using
| cursor buttons as described above.
| Press "Blue" button, colour of program name in the fist
you preselected become blue.
change, by "<)' and/or ">", Press the "A" and / or | Now using Cursor buttons select the second program in
"¥" buttons to change the character. Leave the line by
pressing the "OK" button once more.
Mode:
Set "Mode" item to "TV" for the TV channels.
* If the input is antenna, the appropriate mode is TV.
VCR mode is appropriate for video signals. The mode
the list which you want to exchange with the previously se-
lected program
Press "Blue" again, so the previously and the second se-
lected program will be exchanged.
Delete
First select the program you want to delete by using
can be changed to get a better picture quality if | Cursor buttons. After program is selected press Red
needed.
i button.
|
ENGLISH - 32 -
Feec
Werbung
