Seg PHOENIX Bedienungsanleitung Seite 30

i
i
Sound Standard Selection:
in TV mode
Sound standard button on sound menu is used to select
Mono/stereo or one of the available languages. The exact |
response at the key depends on the signal being received. .
This key will function during the menu is on.
Received audio signal / Response
Mono
No other choice is possible
Toggle between stereo and Mono mode
German dual language
Toggle between language | and Il.
i
oa
"|-If" button is used to select Mono or Stereo, or Dual/ or
Dual ll.
After a program change the following audio mode is ;
selected:
Received audio signal Automatically selected repro-
duction type
MONO MONO
STEREO STEREO
DUAL LANGUAGE DUAL!
Don't care Analogue sound channej
In AV mode
Whether a Mono, stereo or dual language source is con- :
nected to one of the external sources can not be detected, .
so automatic switching is not possible. Default after |
power-on and after selecting another AV source itis as
sumed that the AV source delivers a stereo signal. Th
user can overrule this by means of the (/Il/Mono/Stereo
key on remote control and on screen display will show the |
selected source. The following modes can be selected i
a carousel:
Stereo Mono(= Dual |) Dual it
Equalizer:
tion is available only in Stereo Sound mode.
} EQUALIZER
Predefined sound modes can be selected using "<1" or
't>" buttons. When user mode is entered the user will be
able to enter the equalizer band by pressing "OK" button
|, user can select the frequency by moving "<1" or "I>" but-
tons and change the levels of frequencies pressing "A" or
| "V" buttons. In order to exit the USER mode "OK" button
| is repressed , sound mode change is restored again au-
tomatically for the user mode.
«In order to store the desired equalizer set-up press
"OK" button on the remote control.
Spatial effect:
Spatial effect for Mono (pseudo stereo) and stereo (band-
width enlargement) sound is activated or turned off by this
. item.
Headphone:
_ HP Soundmode
, You can change the language for the headphone, if the
, program has a multi-language broadcasting (dual | and I!)
' using "<1" or ">" otherwise it displays the current sound
| Status.
HP Volume
| Spatial effect
HP Volume:
| You can increase or decrease headphone volume level
using "<T or ">".
ENGLISH - 29-