Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Working with the brush cutter
Before the start
1. Ensure the switch is in the off position and disconnect the battery from the tool.
2. Examine the general condition of the tool. Inspect the guard, switch, cord, check for loose
screws, improper mounting, broken parts and any other condition that may affect its safe
operation. If abnormal noise or vibration occurs during operation, turn the tool off immediately
and have the problem corrected by a qualified repair person.
3. Ensure that you are on a flat surface and have secure footing.
4. Check that the line touches or goes beyond the edge of the guard.
5. Check the cutting attachment, never use blades that are dull, cracked or damaged.
6. Wear the shoulder belt so that it lies on the one side of shoulder as shown in below pic. It can
be removed quickly from your body in case of danger
Starting the brush cutter
Depress and hold the lock-off button, and then squeeze the on/off switch and hold it. Once the tool is
switched on, you can release the lock-off button.
Original user manual FUXTEC FX-E2MS_rev01
51
Werbung
