Fuxtec FX-E2MS Bedienungsanleitung Seite 39

- Never leave the device unattended during work interruptions and store it in a safe place.
After use
- Turn off the device, remove the battery, and then place the device in a safe place.
- Do not store the device within reach of children.
- Make sure that the ventilation slots of the device are free of dirt.
- Spare parts must meet the requirements specified by the manufacturer. Therefore only use original
spare parts or spare parts approved by the manufacturer. When replacing the battery, please follow
the installation instructions provided and remove the battery first.
- Have repairs carried out exclusively by a qualified specialist or a specialist workshop.
Safety instructions for the charger
- Keep the charger away from rain or moisture. The penetration of water into a charger increases the
risk of electric shock.
- Keep the charger clean. There is a risk of electric shock from soiling.
- Check the charger, cable, and plug before each use. Do not use the charger if you notice any
damage. Do not open the charger yourself and have it repaired only by qualified personnel and only
with original spare parts.
Damaged chargers, cables, and connectors increase the risk of electric shock.
- Do not place objects on the charger or place them on soft surfaces. There is a risk of fire.
- Always check that the mains voltage corresponds to the voltage indicated on the charger's
nameplate.
- Never use the charger if the cable, plug, or the device itself is damaged by external influences. Take
the charger to the nearest specialist workshop.
- Never open the charger under any circumstances. Take it to a specialist workshop in the event of a
fault.
Original user manual FUXTEC FX-E2MS_rev01
39