Herunterladen Diese Seite drucken

SodaStream GAIA Bedienungsanleitung Seite 9

Vorschau ausblenden Andere Handbücher für GAIA:

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 24
SET UP
SODASTREAM ® CO
QUICK CONNECT CYLINDER
2
COMPATIBLE SODASTREAM
CO
QUICK CONNECT CYLINDER
2
Please note that the
SodaStream
GAIA
is
®
TM
compatible with the
SodaStream
®
CO
Quick
2
Connect Cylinder and is
NOT compatible with the
SodaStream Screw System
Cylinder.
INSTALLING THE CO
2
QUICK CONNECT CYLINDER
1. Place the SodaStream
®
GAIA
Sparkling
TM
Water Maker on a flat sturdy surface and
pull open the back cover.
2. Remove seal and cap from the
SodaStream
®
CO
Quick Connect Cylinder.
2
WARNING! Never insert or replace the
CO
Quick Connect Cylinder while a
2
plastic carbonating bottle is installed in
the Sparkling Water Maker. This can
cause the plastic carbonating bottle to
burst.
3. Raise the Pink Cylinder Handle. Insert the
CO
Quick Connect Cylinder in the back of
2
the Sparkling Water Maker.
4. Lower the Pink Cylinder Handle.
5. Reinstall the back cover. Now you are
ready to create the bubbles.
16
NON COMPATIBLE
CO
SCREW SYSTEM CYLINDER
2
1
2
3
Bottom
4
5
CREATE THE BUBBLES
COMPATIBLE WITH
THE FOLLOWING ONLY:
Check for compatibility
on the Bottle pack.
1. Fill the plastic carbonating bottle with
cold water up to the fill line. WARNING! Do
not carbonate anything other than water.
Other liquids can contaminate and clog
internal parts, potentially resulting in
excessive pressure, bottle failure during
carbonation and serious injury. Never
carbonate after flavoring has been added.
2. To insert the plastic carbonating bottle screw
the plastic carbonating bottle into the
Sparkling Water Maker. WARNING! Never
use a Sparkling Water Maker with a broken
carbonating tube. This can cause excessive
pressure, bottle failure and serious injury.
3. To carbonate, press the carbonating button
in short 1 second presses; 3 presses for
first
standard carbonation and 5 presses for
strong carbonation.
4. When the desired level of carbonation is
achieved, unscrew the plastic carbonating
bottle. As you start un-screwing the bottle
you will hear the pressure being released
from the bottle.
1L
0.5 L
1L
SodaStream
plastic carbonating bottles
®
1
2
3
Psss
4
Note: You may see small pieces of ice
appear in the water during carbonation of
very cold water. Any ice created will simply
melt.
x3
x5
17

Werbung

loading