flamco Flamcomat MP G4 Remote Kurzanleitung Seite 3

ENG - Register the gateway on the Flamconnect portal.
26
DEU - Registrieren Sie das Gateway im Flamconnect-Portal.
NLD - Registreer de gateway op het Flamconnect-portaal.
FRA - Enregistrez la passerelle sur le portail Flamconnect.
Register via:
https://flamco.aalberts-hfc.com//registration-remote
or scan:
27 ENG - The connections are established when the power led
(4) is solid orange and the user led (5) is solid green.
DEU - Die Verbindungen sind hergestellt, wenn die Pow-
er-LED (4) durchgehend orange und die Benutzer-LED (5)
durchgehend grün leuchtet.
NLD - De verbindingen zijn tot stand gebracht wanneer de
voedingsled (4) ononderbroken oranje brandt en de gebrui-
kersled (5) ononderbroken groen is.
FRA - Les connexions sont établies lorsque le voyant d'ali-
mentation (4) est orange fixe et le voyant utilisateur (5) est
vert fixe.
User Led (4)
Off Startup script not started yet
Red (solid) Startup script is running
Red (blinking) The gateway is up and running, there is no internet connection
Amber (blin- The gateway is up and running, but no connection with Flamconnect Portal
king) and no serial data from device
The gateway is up and running, serial data from device is received but there is
Amber (solid)
no connection with Flamconnect portal
The gateway is up and running and connected with Flamconnect but there is
Green (blinking)
no serial data from the device
The gateway functions as supposed and is connected with the device and the
Green (solid)
Flamconnect portal
All colours Identification mode has been enabled from the Flamconnect Portal
(blinking) (duration: 30s)
Power Led (5)
Off The gateway is not powered
The gateway is powered but there is no SIM installed, no antenna mounted or
Red
no cellular network signal
The gateway is powered, SIM is installed, antenna is mounted and has cellular
Orange
network signal
Flamconnect GW-10
4 5