Topeak PANOCOMPUTER Bedienungsanleitung

R Y Press
MODE Button RESET Button SET Button
( 3 sec to clear
and reset all data)
1 sec: select digit
3 sec: go to next section
REQUIRED ACCESSORIES
/ setting mode
6 sec: switch COMPUTER
PanoBike Heart
MODE and REMOTE
Rate Monitor
MONITOR MODE
Art No. TPB-HRM01
HOW TO SET UP YOUR PANOCOMPUTER
[ ]
OPTION A COMPUTER MODE |
BIKE A.B
Follow the procedure in each section to set up your computer:
to enter each setting mode.
+
3 sec
Screen 1 Screen 2
[ ]
OPTION B REMOTE MONITOR MODE |
1
Open PanoBike App in your smart device then
tap " " icon.
Bluetooth®
HOW TO OPERATE IN SECOND MONITOR MODE (SECOND MONITOR function)
1
On computer for 6 sec to enter REMOTE MONITOR MODE.
6 sec
PANOCOMPUTER
Press and Hold
[
Bolt
PanoComputer Mount
(Fits ø 31.8 mm Handlebar only)
Sensors transmit ride
data to computer directly.
PanoBike Speed & After riding, data can be
Cadence Sensor transferred to PanoBike
App on your smart device.
Art No. TPB-CS01
Date 12/ 24h clock
to change digit. to next selection.
3 sec
Turn the crankarm counterclockwise.
When "1" appears, the Speed & Cadence
Sensor pairing is successful.
Note: Bike B will indicate "2".
If no button is touched for 10 seconds,
the screen will switch to Screen 1
automatically.
Screen 3
(Using English version as an example)
2
On computer for 6 sec to enter REMOTE
MONITOR MODE.
6 sec
(Using English version as an example)
2
Open Topeak PanoBike App. Tap "START RIDE", then tap "START" to record your ride.
WIRELESS
]
for
6 sec to switch.
km/ m Wheel Circumference
Keep following the & processes for the remaining settings then
3 sec
Wear the Heart Rate Monitor on your chest.
When "1" appears, the pairing is successful.
Note: Bike B will indicate "2".
3 sec
to save
ride data
3
Tap "Setup" button to pair smart device with computer.
Choose desired time and unit format. Insert power zones
and wheel size setting. Tap "Save" to complete.
Start riding...
Data syncs with computer
Ride data is transmitted
to computer from smart
device. Smart device
screen can be turned off
to save battery.
User's Guide
[
Sensors transmit ride data to
and displays ride data on
computer. Smart device screen
is turned off to save battery.
Pairing Speed & Cadence
ODO Sensor + Heart Rate Monitor
to confirm .
After pairing, if you want to check the
connection of Heart Rate Monitor in
non-riding status, turn the crank and
connect Speed & Cadence Sensor first.
to check the
ride data just
saved
4
to return to COMPUTER
MODE.
3
to return to COMPUTER
MODE after riding.
II
Tap to stop and save ride
data to your smart device.
GB
]
for 6 sec
for 6 sec