Airzone Aidoo Pro Kurzanleitung Seite 8

Control options
Aidoo Pro Modbus Air to Water devices allow you to control different parameters of the
ventilation unit to which they are connected.
EN
UNIT STATUS
The unit status can be selected from the Aidoo device, enabling on/off control of the unit, of the
circuits and of domestic hot water (DHW) production.
OPERATION MODES
The operation modes vary depending on the unit. The following options are common: Cooling
mode, Heating mode and Auto mode. If the unit is operating in Auto mode, its operation will
depend on the outdoor temperature and the thermostat room temperature.
DHW CONTROL
The manufacturer's units allow you to manage domestic hot water (DHW) production status
control. The "Powerful" function can be activated in DHW production status control, which
forces the DHW to reach a temperature that has been preset in the configuration of the unit. If
DHW is turned off, it will not be possible to activate this parameter.
WORKING SETTINGS
The settings available vary depending on the unit. The following options are common: room
temperature mode and water supply temperature mode. The device can control up to two
different circuits depending on the working settings.
SET-POINT TEMPERATURE
The unit temperature will depend on the working settings:
•
In room temp. mode, the thermostat room temperature will be selected, and in supply
temp. mode, the water supply temperature at which the unit is to operate will be selected.
•
The DHW temperature can be selected within the ranges set by the unit's own main
thermostat.
8