Raychem TCON-Csd/20 Betriebsanleitung Seite 15

Input
parameter meaning
sensor connected in 2-wire circuit
S.En
measurement input group 1 on Type: 701050/X1X-1-XX
Start value for indication range with measurement input voltage or current.
S.cL
example: input signal (e.g. 4 — 20ma) is to be represented on the display
from –10 to 50. setting: s.cl= –10 and s.cH=50.
End value for indication range with measurement input voltage or current
S.cH
process value offset
OF.t
process value offset in °C, °F or digit (no unit)
INDUSTRIAL HEAT TRACING SOLUTIONS
Raychem-IM-INSTALL100-TCONCSD20-EN-1703
value range
from...factory-set...to
pt100: P.ih
P. it
pt1000:
PtC
KTY2X-6:
tAb
or
–999 ... 0... +999
–999 ... 100... +999
-99.9 ... 0.0 ... 99.9
15 / 72