Crivit FC-9109 Bedienungsanleitung Seite 26

Note: the maintenance display turns off when the main-
tenance interval is set to '000'�
• Backlight ON/OFF: turn backlight on or off� When the
backlight is on, you can enter the activation/deactiva-
tion time� You can turn on the backlight during input�
• ETA distance: input of a five-digit number in KM or
MILE unit
• ETA mode: selection between CLOCK (time) and TIME
(ride time)
• Fuel format: selection between LITER and GALLON
• Fuel consumption: input of a three-digit number in
L/100 KM (LITER) or mpg (GALLON) unit
• Unit of temperature: selection between °C and °F
1� Confirm your selection with the 'SET' button (21)�
2� Press the 'MODE' button (15) to exit the settings� You
have successfully configured the basic settings�
Note: if you wish to change the basic settings, follow the
steps in the section 'Resetting the product' and adjust all
of the basic settings�
Attaching the product to the bicycle
1� Attach the product to the bicycle as shown in
Figures C–J�
2� Cut the excess ends of the cable ties (8) with a suit-
able tool, such as a wire cutter (not included in the
package contents)�
26 GB