Texi Bro Benutzerhandbuch Seite 20

S e w i n g b u t t o n s
Machine Setting
*You do not have to adjust the stitch length dial.
Position your fabric and button under the presser foot. Lower presser foot. Turn the
handwheel to make sure needle clears both left and right openings of button. Adjust
width if required. Sew 10 stitches across.
When attaching four-hole buttons, first sew the two holes closest to you. Then,slide the
button so that the needle goes into the two holes toward the rear of the sewing machine,
and then sew them in the same way.
To secure thread, cut the upper thread with 25cm of excess, wind it
around the thread between the button and the fabric, and then tie it
tightly.
UTILITY STITCHES
Attach the embroiderer plate
20