Speed And 360 Degree Flips And Rolls - XciteRC 15008000 Bedienungsanleitung

Speed and rolls · Headless Mode

Speed and 360 degree flips and rolls

360 degree flips and rolls
Headless mode
Headless-MODE
As long as the LED's flash, the Headless mode is active. Press the control lever again to deactivate the
headless mode. The function is deactivated automatically when the throttle stick is set to 0 for more than 5
seconds.
Note: to make sure that the headless mode works correctly, the nose of the model must show away
from the pilot at power on!
XciteRC Rocket 65XS
Trim left - right
When hoovering, the Quadrocopter must
stand in place. If it moves to the right, move
the trim button to the left until it stops, or
vice versa.
Speed: press the right transmitter button during the flight and the Quadro-
copter becomes faster. Press again to return to slower speed. For acoustic
confirmation the transmitter beeps twice. Press again to return to slower flight
- the transmitter beeps once.
Once you are familiar with the aforementioned maneuvers, you can venture
to flips and rolls. Fly at least 1.5 m high, and then press the left transmitter
button. A sound indicates that the mode is active. Now move the right control
lever to the desired direction and the model rolls once around its own axis.
forward
backward
The Headless mode is ideal for beginners to
fly the model safely. In headless mode, the
Quadrocopter always flys from the pilot's
view. No matter how the model is in the air,
the front is always away from the pilot, left
and right does not swap when the model is
flying towards the pilot.
The Headless mode is activated by pressing
the headless mode button, the LED's in the
arms starts flashing to indicate the function.
EN
21