Ringing Tones; Setting The Ringing Tone Volume; Setting The Ringing Tone; Switching Silent Mode On/Off - Auerswald COMfortel M-200 Kurzanleitung

2.
Press
Note: You can change the #21# sequence in the DECT server.

Ringing tones

Setting the ringing tone volume

1.
Press the Menu soft key to open the main menu.
2.
Scroll to Settings and press the Select soft key.
3.
Scroll to Ringing volume and press the Select soft key.
4.
Press on the left-hand or right-hand side of the navigation
key to set the volume.
5.
Press the Change soft key to save the changes and then
press the Back soft key.

Setting the ringing tone

1.
Press the Menu soft key to open the main menu.
2.
Scroll to Settings and press the Select soft key.
3.
Scroll to Ringing tone and press the Select soft key.
4.
Scroll to the ringing tone you require and press the Change
soft key to hear the ringing tone you have selected.
5.
Press the Back soft key.

Switching silent mode on/off

•
Press the Menu soft key and then press # to switch silent
mode on/off.
Note: In silent mode the ringing tone is disabled and the vibra-
tion alarm is enabled.

Switching the vibrator (vibration alarm) on/off

1.
Press the Menu soft key to open the main menu.
2.
Scroll to Settings and press the Select soft key.
3.
Scroll to Vibrate and press the Select soft key.
4.
Scroll to On or Off and press the Change soft key.
5.
Press the Back soft key.
COMfortel M-200/M-300 - Setup and Quick Guide V03 09/2014
to exit this screen.
Operation
59