HOMCOM 370-027V00 Bedienungsanleitung Seite 7

1. As shown in the figure:
- Insert rear wheel to the main frame. Tap
gently until the sound of click.
4.As shown in the picture, first insert the front
wheel assembly into the main frame, then fit
the front cover into the handlebar opening,
and then insert the handlebar opening into the
fork's upper opening, aligning the fork screw
hole with the handle screw hole. Insert the
handlebar fixing screw through the opening;
then, using a socket wrench, tighten it and
lower the front cover. Finally, install the bell on
the handlebar.
2.As shown in
picture, fix the front
fender onto the front fork
using screws.
Tips from the following picture
Insert into hole ( a) and lay the steering
rod flat
a
5.As shown in the picture, first unscrew the nut at the
rear end of the steering rod, then insert the front end
of the steering rod vertically into the front fork hole a,
lay the steering pipe flat, ensuring a secure connec-
tion with the front fork hole; twist the lower push tube
to align the push tube hole b so that the rear end of
the steering rod can be hooked into the hole; once
hooked, secure it with a nut.
7
the 3.As shown in the figure:
- Insert the front wheel
into the front fork, tighten
the bolt and nut.
Tips from the following picture
Twist the push rod ,and adjust it to
the hole(b)
b